Short answer: molybdenum is a refractory metal valued for strength at high temperature and corrosion resistance, and it shows up in scrap as both high-value alloy and as a contained metal in spent catalysts. Recovery economics hinge on two things: getting the molybdenum content established by assay, and pricing it against the molybdenum-concentrate and ferromolybdenum benchmarks for the settlement date.
| Stream | Typical route | Recovered form |
|---|---|---|
| Pure moly / TZM alloy | Remelt or powder metallurgy | Reusable moly feed |
| Spent catalyst | Roast + alkaline/acid leach, precipitation | Molybdic oxide / ammonium molybdate |
| Ferromolybdenum turnings | Sorting, refining | Ferroalloy feed |
Choice of route depends on the contaminant load. Spent catalysts need careful handling because they may carry vanadium, nickel, cobalt and residual hydrocarbons; the molybdenum is separated and re-concentrated rather than remelted directly.
At Liaocheng Feiyan New Material Technology Co., Ltd. molybdenum scrap is settled the same way as every other lot: sample, assay in front of a customer witness, then price against a named benchmark for a named date. Holders may send a sample before any price is agreed. On a metal where catalyst and alloy streams look similar but settle very differently, the assay is the whole transaction.
Often yes. Hydrotreating catalysts can carry meaningful molybdenum alongside cobalt or nickel, and they are one of the largest secondary molybdenum sources. Value depends on the assayed molybdenum percentage and the contaminant profile, so a sample and assay come before any quote.
Molybdenum is priced against the molybdenum-concentrate level and ferromolybdenum tender prices for a named date, not a continuous screen. The settlement contract should name the benchmark and the date, exactly as Feiyan does for every lot.
No, and that is the point. TZM adds titanium and zirconium; pure moly is a different feed. Each is settled against its own assayed content and the route it can take, which is why sorting and grading up front improve the quote.
If you know the grade, share it. If not, send a sample. Tell us whether the material is alloy, wire, or spent catalyst, because the recovery route - and therefore the deduction - is different for each.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.