Short answer: neodymium-iron-boron (NdFeB) magnets are the highest-energy permanent magnets in volume production, and they concentrate the very rare earths - neodymium, praseodymium, dysprosium and terbium - that carry the most supply risk. Recycling them is no longer a fringe activity: as the first generation of EV traction motors, wind-turbine generators and consumer drives reaches end of life, the magnet itself has become the richest, most recoverable rare-earth source outside primary mining.
An NdFeB magnet is roughly 30% rare earth by weight, split between neodymium/praseodymium and, in high-temperature grades, dysprosium and terbium. Primary supply of those elements is geographically concentrated, and the metals are rarely used in isolation - they arrive embedded in alloy and in finished magnets. Recovering them from scrap short-circuits the mining and separation chain and returns material that is already in the right chemistry family.
A credible route starts by removing or neutralising the magnetic field, then breaking the bonded or sintered magnet down. Hydrogen decrepitation is widely used to fracture sintered NdFeB into a powder that can be re-pressed or leached; oxidative or chlorination roasting, followed by solvent extraction, separates neodymium, praseodymium, dysprosium and terbium from iron and boron. The output is a mixed rare-earth concentrate that can be re-introduced to alloy production.
| Step | What happens | What is recovered |
|---|---|---|
| Demagnetise / crush | Field neutralised, magnet fractured | Clean feedstock, no halogens released |
| Roast / leach | Oxidative or acidic treatment | Rare earths moved into solution |
| Solvent extraction | Separate Nd/Pr/Dy/Tb | Individual rare-earth concentrates |
| Re-alloy | Re-form NdFeB feed | Closed-loop magnet material |
At Liaocheng Feiyan New Material Technology Co., Ltd. the rule for rare-earth and alloy scrap is the same as for precious metals: sample first, assay in front of a customer witness, then price against a named benchmark for a named date. We do not quote a pile by eye. Holders in Shandong and beyond may send a sample before any price is agreed, which removes the temptation to trade on an estimate and keeps the settlement transparent.
Yes. Sintered NdFeB can be reprocessed through hydrogen decrepitation and re-pressed, or fully leached and re-extracted into individual rare-earth concentrates that re-enter alloy production. The limiting factor is usually feed sorting, not the chemistry.
Typically yes. Dysprosium and terbium are the heavy rare earths added for high-temperature stability, and they are the scarce, premium elements in the mix. A high-Dy/Tb magnet should be settled against its own assayed content rather than lumped with standard NdPr scrap.
Not necessarily, but it helps. Nickel/copper plating and resin binders are removed during treatment; clean, sorted magnet grades simply cost less to process and settle more favourably. Tell us the grade if you know it - that alone improves the quote.
Thin, physically settled rare-earth markets are priced against published concentrates and alloy tenders for a named date, not a continuous screen. The contract should name the benchmark and the settlement date, the same discipline Feiyan applies to every lot we settle.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.