【Reference prices · live quotation prevails】 Au Gold ▲ 786.20 ¥/g Ag Silver ▲ 9.42 ¥/g Pt Platinum ▼ 318.60 ¥/g Pd Palladium ▲ 245.80 ¥/g Rh Rhodium ▲ 1240.00 ¥/g Ir Iridium ▼ 825.50 ¥/g W Tungsten ▲ 13.20 ¥/kg Co Cobalt ▼ 198.00 ¥/kg In Indium ▲ 1620.00 ¥/kg Mo Molybdenum ▲ 285.00 ¥/kg

Silver Brazing Alloy and Silver Solder Scrap Recycling: How Silver Content Is Assayed, What the Joint Residue Hides, and How Settlement Is Calculated

Bottom line: the payable value of silver brazing alloy and silver solder scrap is set by the silver actually present in the filler metal, not by the brazing rod grade on the invoice. Joint offcuts, brazing strips and spent filler wire carry flux, copper, phosphorus, zinc or cadmium that dilute the lot, and the same alloy does not settle the same way as a clean, segregated batch. A defensible result needs representative sampling, an agreed assay method and a net-weight basis. This guide walks through where the silver hides, how it is measured, how the settlement formula is built, and what to check before shipping to Liaocheng Feiyan New Material Technology Co., Ltd. in Shandong, China.

Where the silver actually sits in brazing scrap

Brazing filler metals are chosen for flow temperature and joint strength, so silver is rarely present as a pure metal. Common families include silver-copper (Ag-Cu), silver-copper-phosphorus (Ag-Cu-P), silver-cadmium (Ag-Cd) and silver-tin or silver-indium brazes. Each puts the silver in a different matrix, and the scrap stream reflects that. Four sources dominate intake:

  • Cut filler rod and wire ends — the cleanest stream; grade is often still legible on the bundle label, but the label is a sorting hint, not a settlement result.
  • Brazed joint offcuts and stripped assemblies — silver is concentrated in a thin braze layer bonded to copper, brass or steel base metal. The base metal dominates weight; the braze layer carries the value.
  • Brazing foil, strip and preform punch-outs — usually higher grade and more homogeneous, but often contaminated with oil or flux residue from the forming process.
  • Spent flux and brazing station residue — low silver concentration, high flux salt content; whether it is economic to process depends entirely on the assay.

The practical error is treating mixed brazing scrap as uniform silver alloy. A lot that is mostly copper tube with a thin silver-braze joint must be quoted on contained silver, not on a bulk "silver alloy" assumption.

Why flux, copper and phosphorus change the payable figure

Three things move a brazing scrap quote away from the headline silver content:

  • Flux and organic residue — borax-based and fluoride fluxes, oils and pickling residue add mass that is not metal. Loss on ignition is measured and deducted, or the lot is cleaned before weighing.
  • Base-metal dilution — copper, brass and steel from brazed assemblies are visible in the assay and must be separated arithmetically from the silver value.
  • Phosphorus and cadmium — deoxidiser and alloying elements in Ag-Cu-P and Ag-Cd brazes. They affect refining route and environmental handling, and are reflected in the treatment charge rather than paid as silver.

A lot described as "silver solder" can therefore settle anywhere from a high-silver filler stream to a low-grade copper-and-flux mixture. The only reliable discriminator is the assay, backed by a mass balance.

Which analytical method answers which question

StageMethodPurposeLimitation
On-site screenXRF screening of sorted filler metal and joint concentrateSeparate high-grade filler from base-metal-heavy offcutsSurface and matrix effects; thin braze layers give biased readings; not a settlement result
Referee assayFire assay for silver, with ICP-OES on the dissolved sample for Cu, Zn, P and CdReproducible contained-silver figure and impurity profileDestructive; requires a homogenised, sealed reserve sample
CorrectionLoss on ignition and net-weight reconciliationDeduct flux, oil and moisture before settlementSampling must represent the whole lot, including the dirty fraction

XRF is useful at intake because it is fast and non-destructive. It cannot settle a brazing scrap lot: a thin silver-braze layer on a copper tube reads as copper from the surface, and no handheld instrument averages the layer correctly across a mixed lot. Fire assay on a milled, split sample is the settlement basis; ICP-OES defines the impurity penalty.

From brazing scrap to a saleable product

The recovery route depends on how clean the silver-bearing fraction is. Segregated high-grade filler and foil go to melting and refining, producing silver doré and then refined silver. Joint offcuts and concentrates are first mechanically separated to remove base metal, then smelted; copper and other base metals are recovered as by-products where the grade justifies it. Flux-rich residue is treated separately because salt content drives both yield and furnace behaviour. Through every stage, a batch mass balance covering input, output, residue and dust is the evidence that the quoted recovery is real.

Settlement formula, worked end to end

A transparent settlement has four terms: payable silver, agreed price, refining deduction and treatment charge. In simplified form:

Net payable = (net dry weight × assayed Ag grade × payable percentage × quoted Ag price) − refining charge − treatment charge.

Worked example, with illustrative numbers only: a lot of 100 kg of sorted brazing filler, 2% loss on ignition, so 98 kg dry weight; fire assay returns 42% Ag; the contract pays 97% of contained silver; quoted silver price is taken from the public quote board on the settlement date. Contained silver is 98 × 0.42 = 41.16 kg; payable silver is 41.16 × 0.97 = 39.93 kg. Gross value is 39.93 kg × the agreed price per kilogram, less the refining and treatment charges stated in the contract. The numbers here are illustrative; the actual price and charges are those agreed on the settlement date, and no price is quoted in this guide.

Pre-shipment checklist

  • Segregate by stream — keep clean filler rod, joint offcuts and flux residue in separate lots; do not blend grades.
  • Declare the brazing family — Ag-Cu, Ag-Cu-P, Ag-Cd or other, so refining route and environmental handling are agreed in advance.
  • Remove loose base metal — strip steel and heavy brass attachments before weighing; they are not payable silver.
  • Seal a reserve sample — mill and split the lot, seal one sample for referee assay and keep the batch ID with it.
  • Record net and dry weight — agree the loss-on-ignition method before shipment, so the deduction is not disputed later.

For a quotation in English, contact our export team at the Liaocheng Feiyan New Material Technology Co., Ltd. export desk with the brazing family, approximate grade, lot weight and photos of the material. A preliminary indication can be given from that information; the final figure always rests on the referee assay and the agreed settlement terms.

Frequently asked questions

Is silver solder the same as silver brazing alloy?

In scrap trade the terms overlap. "Silver solder" generally refers to lower-temperature, often higher-silver filler; "silver brazing alloy" covers the wider Ag-Cu, Ag-Cu-P and Ag-Cd families. Payment is based on assayed silver content, not on the name.

Can XRF give a settlement figure for brazed joints?

No. XRF reads the surface and cannot average a thin braze layer bonded to a copper or steel base. It is a sorting tool; fire assay on a homogenised sample is the settlement basis.

Why is my lot penalised for flux?

Flux, oil and moisture add mass that is not metal. Loss on ignition is measured and deducted, or the lot is cleaned before weighing, so the quote reflects contained silver rather than gross weight.

Are phosphorus and cadmium paid for?

No. They are deoxidiser and alloying elements. They influence the refining route and treatment charge, but payment is for contained silver.

What document do I need before shipping?

A lot description with the brazing family, approximate grade, net weight, a sealed reserve sample and the batch ID. The assay and settlement terms are agreed against those records.

Business inquiries:
Precious Metal Recycling · Grounding Materials · Products · Contact Us
Tel 19963594228 | Office 0635-2112001 | Email fykj425@gmail.com
← Back to News

Liaocheng Feiyan New Material Technology Co., Ltd.

Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China

Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com

Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.

鲁ICP备2026056441号-1 | 鲁公网安备37159902000530号

⬆