【Reference prices · live quotation prevails】 Au Gold ▲ 786.20 ¥/g Ag Silver ▲ 9.42 ¥/g Pt Platinum ▼ 318.60 ¥/g Pd Palladium ▲ 245.80 ¥/g Rh Rhodium ▲ 1240.00 ¥/g Ir Iridium ▼ 825.50 ¥/g W Tungsten ▲ 13.20 ¥/kg Co Cobalt ▼ 198.00 ¥/kg In Indium ▲ 1620.00 ¥/kg Mo Molybdenum ▲ 285.00 ¥/kg

Silver Recovery from Used X-ray Film and Photographic Waste: Where the Silver Sits, How It Is Measured, and How Settlement Is Calculated

Bottom line: in used X-ray film and photographic waste the value sits in a very thin silver-bearing emulsion layer on a plastic base, or in dissolved silver complexes in spent fixer. Neither the weight of a box of film nor the number of sheets is a payable figure. A defensible settlement needs the streams kept apart, a representative sample, a method that actually measures the silver in that sample, and a formula whose every parameter is agreed before shipment. This guide describes the chain used when material is sent to Liaocheng Feiyan New Material Technology Co., Ltd. in Shandong, China.

Where the silver actually sits

  • Medical, dental and industrial radiography film — silver halide crystals dispersed in gelatin on one or both sides of a polyester base. The base is most of the weight; the emulsion carries the value.
  • Photographic film, instant film and photographic paper — the same coating principle, but coating weight and base thickness vary widely between product families.
  • Spent fixer and fixer concentrate — silver is present as soluble thiosulfate complexes after development. Here the payable quantity is concentration times volume, not a dry weight.
  • Fixer sludge, evaporator residue and rinse water — low and variable silver content; economic only if the measured concentration and the processing cost are both known.

The first sorting decision is therefore film versus liquid. Mixing them before sampling makes both streams harder to value: wet film changes net weight, and a liquid sample diluted by film wash water understates the fixer grade.

Why a handheld XRF reading on film is not a settlement result

XRF is useful for screening a folder of mixed scrap, but a radiography film is a coated polymer: the signal is dominated by the base and by the thinness of the coating, and results depend on how the sample is folded and presented. For settlement, take a representative portion of the sorted film, remove paper sleeves and non-film material, then determine silver by a method that consumes the sample — typically fire assay after ashing, or complete dissolution followed by ICP-OES or AAS. For fixer, analyse the liquid directly with an appropriate dissolution-free method and report the result as mass of silver per litre. Record which method was used; two numbers with different methods are not interchangeable.

Sampling that survives a dispute

  1. Segregate by source: keep hospital/dental film, industrial radiography film, photographic paper and liquid fixer in separate, labelled lots.
  2. Record the lot: source, collection date, approximate quantity, and whether the film is dry and free of sleeves.
  3. Take a representative portion: film is cut into strips across several sheets from different parts of the lot, not taken from the top of one box.
  4. Keep duplicates: one portion for the buyer's assay, one sealed reference portion retained by the seller.
  5. Maintain custody: who sampled, when, and where the reference portion is stored.

How the settlement figure is built

For film: payable silver = net film weight × assayed silver grade × published silver price (named trade date) × agreed recovery factor − agreed treatment or refining fee. Net weight means film only, after sleeves, paper and moisture allowances have been resolved. For fixer: payable silver = measured silver concentration × measured volume × published silver price × agreed recovery factor − handling and processing charge. In both cases the quote must name the trade date of the silver price; a price without a date is not a price. Recovery factors and fees belong in the written agreement, not in a later adjustment.

Compliance and documentation

Used radiography film can carry patient identifiers on the sleeve or on the film itself. Remove or cover personal information before material leaves the site, and keep the chain-of-custody record with the shipment. Spent fixer is a liquid chemical waste in most jurisdictions: collect it in sealed, labelled containers, do not pour it to drains, and hand it to a licensed carrier with the required waste-transfer documentation. Follow the rules that apply at the collection site and at the destination. Declare any lead foil, lead screens or other scrap mixed with the film rather than hiding it in the lot weight.

Pre-shipment checklist

  • Film, paper and fixer segregated and labelled by source.
  • Sleeves and paper removed; net-weight basis agreed in writing.
  • Duplicate samples taken and sealed reference retained.
  • Assay method, recovery factor, fee and silver-price trade date agreed.
  • Personal data removed; fixer containers sealed and transport documentation ready.

About us: Liaocheng Feiyan New Material Technology Co., Ltd. in Shandong, China, handles precious metal recycling alongside grounding, shielding and high-purity metal supply. We provide on-site sampling and pickup. For lot-specific terms, contact fykj425@gmail.com or +86-635-2112001.

Business inquiries:
Precious Metal Recycling · Grounding Materials · Products · Contact Us
Tel 19963594228 | Office 0635-2112001 | Email fykj425@gmail.com
← Back to News

Liaocheng Feiyan New Material Technology Co., Ltd.

Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China

Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com

Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.

鲁ICP备2026056441号-1 | 鲁公网安备37159902000530号

⬆