【Reference prices · live quotation prevails】 Au Gold ▲ 786.20 ¥/g Ag Silver ▲ 9.42 ¥/g Pt Platinum ▼ 318.60 ¥/g Pd Palladium ▲ 245.80 ¥/g Rh Rhodium ▲ 1240.00 ¥/g Ir Iridium ▼ 825.50 ¥/g W Tungsten ▲ 13.20 ¥/kg Co Cobalt ▼ 198.00 ¥/kg In Indium ▲ 1620.00 ¥/kg Mo Molybdenum ▲ 285.00 ¥/kg

XRF Analysis for Metal and Alloy Verification: What It Detects and Where It Fits

X-ray fluorescence (XRF) is a fast, non-destructive way to read the elemental composition of a metal or alloy in seconds. In recycling and QA it is the workhorse for sorting scrap, verifying alloys and checking incoming material before refining. This guide explains where XRF helps and where it should not be the only test used.

How XRF works

A handheld or benchtop XRF gun directs X-rays at the sample; the atoms emit fluorescent X-rays at element-specific energies, which the instrument reads to build a composition profile. No cutting or dissolution is required, so the sample is undamaged and testing can happen on the spot.

What XRF does well

  • Alloy identification — telling 304 from 316 stainless, Inconel families, brasses and bronzes apart.
  • Scrap sorting — separating high-value from low-value streams before refining.
  • Coating and plating checks — thickness and composition of surface layers.
  • Contaminant screening — flagging unwanted elements that would downgrade a lot.

What XRF cannot do alone

  • Light elements — carbon, nitrogen, boron, lithium and beryllium are below or at the edge of standard XRF range and need other methods (OES, combustion analysis).
  • Surface-dependent results — paint, oxide, oil or coating bias the reading; clean the spot first.
  • Low concentrations — trace impurities may fall below detection; for settlement-grade assay, lab digestion (ICP) remains the reference.

Where it fits in a recycling workflow

XRF is the first-pass screen: it sorts, grades and flags material at intake so valuable lots are not blended and contaminated lots are quarantined. Final settlement still rests on laboratory assay, typically ICP after acid digestion, using a two-sample protocol for dispute resolution. We use XRF for on-site intake sorting and ICP for settlement-grade analysis; for a quotation in English, contact our export team with your material photos and weights.

Frequently asked questions

Can XRF tell precious-metal content precisely?

For screening, yes within its detection limit; for settlement it is confirmed by laboratory assay (ICP), which is the basis for payment.

Does XRF damage the sample?

No. It is non-destructive, which is why it is ideal for intake sorting and incoming-quality checks.

Why clean the surface before testing?

Coatings, oxide and oil sit above the bulk metal and would be read instead of it, giving a wrong composition; a quick grind or wipe removes the bias.

Business inquiries:
Precious Metal Recycling · Grounding Materials · Products · Contact Us
Tel 19963594228 | Office 0635-2112001 | Email fykj425@gmail.com
← Back to News

Liaocheng Feiyan New Material Technology Co., Ltd.

Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China

Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com

Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.

鲁ICP备2026056441号-1 | 鲁公网安备37159902000530号

⬆