High-purity metals are the building blocks of semiconductors, optoelectronics and advanced research. A small impurity fraction can change resistivity, bandgap or catalytic behaviour, so grade and certification matter as much as price. This guide explains the notation and what to put in a purchase specification.
Purity is written as N-grade: 3N means 99.9%, 4N means 99.99%, 5N means 99.999%, and 6N means 99.9999%. The number of nines is the fraction of the primary metal; the remaining part is the sum of all impurities. For critical films and devices, 4N–6N is typical, while 3N may suffice for less sensitive functional layers.
A useful order includes: metal and target purity (N-grade), form and dimensions, tolerance, impurity profile if a specific element must be controlled, packaging (often vacuum or inert), and the required certificate of analysis. State the application so the supplier can flag grade-vs-cost trade-offs. For a quotation in English, contact our team with your specification; we supply high-purity metals and recover spent material for recycling across Shandong Province.
Not necessarily. Beyond the point the film or device tolerates, extra nines add cost without benefit; the right grade is set by the failure mode the impurity would cause.
By ICP-OES/MS and, for surface and trace work, GDMS; a certificate of analysis reports the measured impurity levels against the requested grade.
Often yes. Bonding wire, target offcuts and process scrap are recovered through refining and can be returned to high-purity feedstock, lowering net material cost.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.