Bottom line: the value of spent palladium-on-carbon catalyst is decided by representative sampling, an agreed assay method and a defensible net weight, not by the nominal loading printed on a datasheet. XRF screening, fire assay or ICP-OES confirmation, loss-on-ignition test is the practical assay chain for spent Pd/C catalyst, palladium-bearing filter cake, wash liquor and spent carrier. The most common dispute is settling on the nominal Pd loading while ignoring adsorption losses and loss on ignition. This guide walks through sampling, analysis, flowsheet and settlement for suppliers shipping to Liaocheng Feiyan New Material Technology Co., Ltd. in Shandong, China.
A single spot sample cannot support settlement of a heterogeneous lot. spent Pd/C catalyst, palladium-bearing filter cake, wash liquor and spent carrier usually mixes a carrier, coatings, solder or adsorbed media with the target metal. Homogenise or mill the lot, split it into test, referee and sealed reserve samples, and record the batch ID and net weight. The sealed reserve is the only defensible evidence if a result is challenged.
| Stage | Method | Purpose | Limitation |
|---|---|---|---|
| On-site screen | XRF screening, fire assay or ICP-OES confirmation, loss-on-ignition test | Sort the lot and bracket the expected grade | Matrix and surface effects; not a settlement result |
| Referee assay | Fire assay / ICP-OES / ICP-MS | Reproducible quantitative figure | Destructive; requires a sealed reserve |
| Correction | Moisture, loss on ignition, net weight check | Deduct water, carrier and impurities | Omitting it systematically overstates metal |
The sequence drives recovery: low-temperature ashing, HCl/oxidiser leach, solvent extraction or precipitation, refining. Concentration and dissolution are where losses concentrate, so keep a batch mass-balance covering input, output and residue, and retain residue assays. A settlement discussion backed by a mass balance is far shorter than one based on a single grade number.
Payable metal = delivered net weight x assayed grade x agreed recovery rate, priced against a named quote and net of agreed refining charges. Put these four items in the contract:
| Item | Recommended wording |
|---|---|
| Net weight | Weighed mass after deducting packaging, carrier, backing plate and foreign matter |
| Grade | Referee result on the jointly sealed sample, with a named challenge laboratory |
| Recovery rate | Agreed per material class and flowsheet, never a verbal promise |
| Price basis | Name the trading day and the public quote used |
The single most expensive mistake is settling on the nominal Pd loading while ignoring adsorption losses and loss on ignition: the offer looks attractive, yet the final settlement falls well below expectation.
For background only, the site quote board collected on 2026-11-21 is shown below. It describes the pricing environment and is not a scrap settlement price.
| 品种 / Item | 报价 / Price | 涨跌 / Change | 幅度 / % | 来源 / Source |
|---|---|---|---|---|
| 黄金 Au99.99 | 755.01 元/克 | -9.54 | -1.25% | 上金所 |
| 黄金 Au(T+D) | 756 元/克 | -8 | -1.05% | 上金所 |
| 白银 Ag(T+D) | 9670 元/千克 | -238 | -2.40% | 上金所 |
| 铂金 Pt99.95 | 325.9 元/克 | -13.56 | -3.99% | 上金所 |
| 伦敦金(现货黄金) | 3534.64 美元/盎司 | -90.37 | -2.49% | 国际 |
| 伦敦银(现货白银) | 41.18 美元/盎司 | -1.67 | -3.90% | 国际 |
| 铂金(纽约) | 1285.4 美元/盎司 | -62.1 | -4.61% | 国际 |
| 钯金(纽约) | 888.9 美元/盎司 | -28.8 | -3.14% | 国际 |
Data: 2026-11-21, collected 2026-11-21 09:22 ; source: 上海黄金交易所 · 伦敦/纽约国际盘. Indicative only, not a settlement basis.
Settlement is based on the assay of a jointly sealed representative sample: net weight, measured metal content and an agreed recovery rate. Nominal loading or visual inspection alone should never be used as the settlement basis.
XRF is a non-destructive surface screen affected by coatings, particle size and matrix effects. Fire assay and ICP are destructive quantitative methods suited to settlement confirmation. A large gap calls for re-splitting the sample rather than choosing one number.
Provide the material origin, batch list, net weight record, moisture and impurity notes, and agree the sampling method, sealed sample ID and the window for a challenge assay.
Compiled by the research team of Liaocheng Feiyan New Material Technology Co., Ltd. (Liaocheng, Shandong, China), 2026-11-21. Market figures come from this site's public quote board and are indicative only, not an offer or settlement basis.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.