Short answer: electrical contacts are among the best silver scrap streams that most sellers under-price, because the silver fraction is high — commonly 80–95% in the AgCdO, AgSnO2, AgNi and AgC families — but the tips arrive welded to copper and steel carriers that dilute the lot. On the Shanghai spot precious-metal quotes published for 26 October 2026, 1# silver 99.99% was quoted at 13,010–13,040 RMB per kilogram; taking the 13,025 RMB mid-point, a lot assaying 90% silver carries about 11,723 RMB per kilogram of contained silver before recovery loss and refining charge.
Two decisions determine almost all of the money: separating the silver-bearing tips from their carriers before weighing, and refusing to let one blended assay cover several different contact families. Liaocheng Feiyan New Material Technology Co., Ltd. sorts mixed lots by family, assays each separately and settles each against its own result.
A third point matters for anyone timing a shipment: on 26 October 2026 Shanghai silver fell 40 RMB per kilogram on the day while gold fell 3.25 RMB per gram, yet on the Reuters tape spot silver was up 0.6% at 54.19 USD/oz in early trading. Intraday screens and domestic settling quotes routinely disagree. Settlement follows the domestic quote that the contract names, not whichever chart is on screen.
Contact tips and rivets are found in contactors, relays, circuit breakers, switchgear, motor starters, timers, thermostats and increasingly in EV and charging-infrastructure contactors. Because the same equipment families have been built for decades, a decommissioning job typically yields a mixture of several alloy generations in one drum, which is exactly why a single blended assay fails.
| Contact family | Nominal silver fraction | Gross silver value, RMB/kg | Note |
|---|---|---|---|
| Fine silver contact, Ag 99.9 | ≥99.9% | ~13,012 | Rarest and simplest to settle |
| Silver-copper eutectic, e.g. AgCu 7.5 | ~92.5% | ~12,048 | Hard silver used where wear resistance is needed |
| Silver-graphite, e.g. AgC 3 / AgC 5 | ~95–97% | ~12,374–12,634 | Graphite phase lowers density, check by assay |
| Silver-tin oxide, e.g. AgSnO2 8 / 12 | ~88–92% | ~11,462–11,983 | The RoHS-compliant replacement for AgCdO |
| Silver-zinc oxide, e.g. AgZnO 8 | ~90–92% | ~11,723–11,983 | Common in European switchgear |
| Silver-nickel, e.g. AgNi 10 / 20 | ~80–90% | ~10,420–11,723 | Steel backing is common, separate it |
| Silver-cadmium oxide, e.g. AgCdO 10 / 12 | ~85–90% | ~11,071–11,723 | Cadmium-bearing, needs controlled refining |
| Silver-tungsten, e.g. AgW 50 | ~50% | ~6,513 | Refractory; lower silver but real tungsten credit |
| Silver-plated copper contact | typically <1% | — | Priced as copper plus a small silver credit |
Composition figures are nominal design values for reference, not assay results; a given lot may differ. Gross silver value is the 13,025 RMB/kg mid-point of the Shanghai spot precious-metal quotes published for 26 October 2026 multiplied by the stated fraction, before recovery loss and refining charge, and is not an offer.
| Factor | Why it costs you | Mitigation |
|---|---|---|
| Copper or steel carriers and rivet shanks | Weighed as scrap but assays as base metal | Shear or press the tips off before weighing |
| Plastic housings, coil assemblies, springs | Adds weight and raises treatment cost | Strip assemblies to contact grade lots |
| Mixed families in one drum | A blended assay underpays the high-silver family | Sort by alloy family before sampling |
| Cadmium content | Requires a dedicated refining route with cadmium capture | Declare AgCdO up front and keep it segregated |
| Arc erosion products and slag | Oxide and refractory phases do not assay as silver | Settle on measured silver fraction, not total mass |
| Oil, grease and moisture | Overstates gross weight at intake | Agree a dry-weight basis before shipment |
Gold-plated contacts, connector pins and edge-card fingers turn up in the same decommissioning drums, and they behave completely differently. The gold sits in a film measured in micrometres, so the value is a function of plated area multiplied by thickness rather than of the bulk silver fraction. Gold has a density of 19.32 g/cm3, so one micrometre over one square metre is 19.32 g. At the Shanghai gold 99.99% mid-point of 859.5 RMB per gram from Shanghai spot precious-metal quotes published for 26 October 2026:
| Plating class | Thickness | Gold per m2 | Gross gold value per m2 |
|---|---|---|---|
| Immersion gold, ENIG | 0.05–0.1 µm | 0.97–1.93 g | ~830–1,660 RMB |
| Flash gold | 0.1–0.25 µm | 1.93–4.83 g | ~1,660–4,150 RMB |
| Hard gold on edge fingers | 0.75–1.5 µm | 14.5–29.0 g | ~12,450–24,910 RMB |
| Heavy gold on premium contacts | 2.5–5 µm | 48.3–96.6 g | ~41,510–83,030 RMB |
The practical conclusion is that this arithmetic cannot be applied to a real drum. Gold is deposited only on selected functional surfaces, the plated area of a mixed lot is not measurable by inspection, and the difference between a flash and a hard-gold specification changes the answer by more than an order of magnitude. Plated lots are settled the same way as bulk contacts: weigh, sample representatively, assay, settle on the measured result. Handheld XRF will tell you that gold is present and roughly how thick the layer reads, which is useful for sorting, but the settlement number comes from a dissolved sample.
Liaocheng Feiyan New Material Technology Co., Ltd. applies the same sampling principle to platinum-group scrap, set out in PGM scrap sampling and assay, with the charge structure in how precious metal recycling settlement works. Braze and brazing-paste residues that come off contact assemblies are treated with the same family-splitting rule.
Source and disclaimer: silver, gold and reference figures are Shanghai spot precious-metal quotes published for 26 October 2026, as quoted in the Chinese market note issued by Liaocheng Feiyan New Material Technology Co., Ltd. on the same date, cross-checked against the same-day Reuters spot references of 4,009.87 USD/oz gold and 54.19 USD/oz silver. All values are indicative arithmetic for technical communication only, not a quotation and not investment advice. Actual settlement depends on mutually accepted assay results and the signed contract. Prepared by Liaocheng Feiyan New Material Technology Co., Ltd..
Common switchgear contact alloys typically contain between 80% and 95% silver by nominal composition, with AgCdO, AgSnO2 and AgNi families sitting in the 85-92% band and AgC grades higher. Silver-plated copper contacts contain well under 1% silver and are priced as copper with a small silver credit. Only an assay of the specific lot converts those nominal ranges into a payable figure.
Using the Shanghai 1# silver quote of 13,010-13,040 RMB per kilogram published for 26 October 2026, taking the 13,025 RMB mid-point, a lot assaying 90% silver carries about 11,723 RMB per kilogram of contained silver before recovery loss and refining charge. A lot at 85% carries about 11,071 RMB per kilogram, and a silver-tungsten contact at about 50% silver carries about 6,513 RMB per kilogram.
Yes, wherever it is economical to do so. Selling contactor assemblies whole means paying for the carrier weight as if it were silver-bearing material, or accepting a heavily diluted blended assay. Separating the tips usually raises the payable silver fraction enough to cover the labour several times over on mixed switchgear.
Yes, but they route differently. AgCdO contains cadmium, which is restricted under the EU RoHS directive, so the lot needs controlled refining with dedicated cadmium capture rather than being blended into a general silver stream. Declare AgCdO content before shipment so it can be routed correctly and priced for the extra treatment step.
By assay, not by calculation. Gold plating thickness is normally stated in microinches or micrometres, and at a thickness of 0.1 micrometre a square metre of plated surface carries roughly 1.93 g of gold, worth about 1,660 RMB at the 26 October 2026 Shanghai gold price of 859.5 RMB per gram, but nobody can measure the plated area of a mixed contact lot accurately enough to price from that arithmetic. A representative sample dissolved and assayed gives the real number.
Yes. Mixed lots are normal in decommissioning work. We sort them into families, assay each family separately and settle each against its own result, because a blended assay across fine silver, silver-nickel and silver-tungsten grades systematically underpays the high-silver families in the mix.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.