Short answer: two buyers quoting the same drum of palladium-on-carbon can differ by 20% because they are not pricing the same thing — they are pricing two different ideas of what that drum contains. Settlement in precious-metal recycling is measured grade × recovery rate × benchmark price − refining charge, and grade is a multiplier: a one-point gap in assay is amplified by a metal price quoted in hundreds of yuan per gram. Liaocheng Feiyan New Material Technology Co., Ltd. settles PGM scrap on tested results, which is why we ask for sample preparation and a sealed reserve sample before we talk about a number.
Assay is not a formality that follows the deal; it is the step that decides whether the deal is worth doing. This walkthrough covers the sampling sequence, how to choose between XRF, fire assay and wet chemistry, what each common scrap type demands, and the three clauses that keep a settlement from turning into an argument.
Conclusion first: grade is a multiplier, not an adjustment. On a platinum-bearing lot, one percentage point of measured difference translates into tens of thousands of yuan of settlement difference per tonne at a platinum price of several hundred yuan per gram. A buyer who quotes a firm number before seeing data is either guessing or planning to re-trade on arrival — the reputable answer to “what will you pay” before testing is a range, not a price.
Indicative reference prices displayed on feiyankeji.com.cn on 25 October 2026 (site price bar, retrieved the same day; indicative only, not an exchange settlement price): platinum Pt ¥318.60/g (down on the day), palladium Pd ¥245.80/g (up), rhodium Rh ¥1,240.00/g (up), iridium Ir ¥825.50/g (down), gold Au ¥786.20/g (up), silver Ag ¥9.42/g (up). At these levels every point of grade carries real money, which is exactly why method matters more than opinion.
Conclusion first: representativeness beats instrument precision. A perfectly analysed non-representative sample produces a confidently wrong settlement. Four actions carry most of the value:
Conclusion first: XRF screens and sorts; fire assay and wet chemistry settle. They are complements, not substitutes.
| Method | Characteristics | Best used for |
|---|---|---|
| X-ray fluorescence (XRF) | Non-destructive, results in minutes, usable on site | Receiving screening, sorting, rapid evaluation of incoming lots |
| Fire assay | Collection followed by gravimetric or titrimetric finish; high accuracy and precision | Bulk settlement, arbitration, high-grade material |
| Wet chemical analysis (ICP / AAS after dissolution) | Good element resolution across multi-element or low-grade samples | Multi-element scrap, low-content samples, impurity profiles |
XRF reads a surface and a shallow depth. On plated parts, clad components and coarse particles that is not the bulk composition, and matrix effects move the reading. Industry practice therefore treats chemistry as the settlement basis and XRF as process control. See our note on XRF analysis for metal and alloy verification for where the technique is genuinely reliable.
Platinum and palladium on carbon catalysts. The carbon carrier is hygroscopic and its moisture swings, so test moisture first and settle on dry basis. The metal sits as fine dispersed particles, which makes single-point sampling unreliable — blend and sample multi-point. High carbon loadings need ashing before dissolution or the result reads low. Background and routine for Pd/C catalyst recycling cover the same material on the process side.
Platinum-rhodium thermocouple wire and platinum gauze. High grade and comparatively homogeneous, so the risk shifts from sampling to identification: confirm the grade (PtRh10, PtRh30, gauze purity) and account for surface oxide and contamination before melting a sample.
Electronic scrap and plated parts. Precious metal concentrates in the plating or in specific components; shredding everything together dilutes it into the base matrix. Classify by component first, prepare and test each class separately, then weight the results by mass fraction to get total metal.
Conclusion first: fix the method, the benchmark day and the deduction basis in writing before the truck moves. A PGM recycling quote has four parts — benchmark price, measured grade, agreed recovery rate, refining charge — and three of them are negotiable. The full structure is set out in how precious metal scrap recycling pricing works.
Liaocheng Feiyan New Material Technology Co., Ltd. works to three rules in day-to-day recycling: test before quoting, seal a reserve sample, and settle the clauses first. When prices move sharply attention goes to the market, but over a full cycle it is standardised testing and settlement — not one lucky call on the price — that stabilises margin. For suppliers in Shandong and beyond, sorting the consignment and keeping a reserve sample before dispatch usually beats shopping the lot around.
For an overview of what we accept and how settlement runs, see precious metal recycling capabilities, or contact us at +86 199 6359 4228 / fykj425@gmail.com. Material on this page is industry guidance only and does not constitute a trading or investment recommendation; actual quotations depend on assay results and the benchmark price of the day.
Price figures above are the indicative reference prices carried in the price bar on feiyankeji.com.cn, retrieved 2026-10-25; they are indicative, not exchange settlement prices. Sampling, assay and settlement practice is described from standard industry convention and the operating procedure of Liaocheng Feiyan New Material Technology Co., Ltd., compiled 2026-10-25 as the English edition of our Chinese technical note published 2026-10-23. Quotations for any specific lot depend on its own assay and on the benchmark price of the settlement day.
Mainly because the two buyers are assuming different grades. Where the sample is taken, how finely it is milled, and which method is used - XRF screening versus fire assay or wet chemistry arbitration - all move the final figure. With grade acting as a multiplier, a one-point difference can shift settlement by thousands of yuan.
XRF is well suited to rapid screening and on-site judgement, but it has limited representativeness on light matrices, plated parts and heterogeneous material. Bulk settlement normally takes fire assay or wet chemical analysis as the arbitration basis, with XRF as a supporting process-control check.
The carbon carrier absorbs moisture and the precious metal is unevenly distributed, so blend thoroughly and measure moisture before sampling, then settle on a dry basis. On large consignments take multiple points rather than one grab sample, to avoid single-point bias.
Whatever the contract says. Common practice is to fix a benchmark day - the delivery date, the date the assay is completed, or a date both parties price on - and to write a pricing window clause into the contract so that volatile markets do not reopen the negotiation.
Yes. A sealed duplicate costs almost nothing and is the practical way to obtain an independent re-test when two assay results disagree. Ask for it to be sealed and signed by both parties at the time of sampling.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.