Short answer: tungsten and molybdenum sit next to each other in the periodic table and behave alike in alkaline solution, so a crude leach pulls both into the same liquor and neither can be priced cleanly. The fix is a directed separation rather than a better furnace: pressure digestion to solubilise the tungsten, then solvent extraction or ion exchange to split molybdenum out, or selective precipitation of tungsten as synthetic scheelite with the molybdenum left in solution. Liaocheng Feiyan New Material Technology Co., Ltd. explains the routes below, the parameters that decide which one fits your scrap, and the measurement habits that stop settlement disputes.
Cemented carbide, tungsten-molybdenum electrodes and die remnants routinely arrive as mixed material. Because Pricing follows separate tungsten and molybdenum content, material that is never separated is material that is never fully paid for.
Both are refractory metals with similar chemistry. In alkaline media each forms soluble salts, so any straightforward leach produces a mixed liquor. Cemented carbide adds cobalt, carbon and traces of precious metals to the matrix, and simple remelting just carries the impurities through.
| Route | Key parameters and basis | Suited to |
|---|---|---|
| NaOH pressure digestion | Tungsten recovery can be raised above 95% (Baidu Baike, Tungsten scrap entry) | Tungsten concentrate, cemented carbide |
| Atmospheric alkali / acid / salt decomposition | Conversion to sodium tungstate by high-pressure or atmospheric decomposition is listed as a standard step in the Solid Waste Environmental Management Guideline for Tungsten Metallurgy (draft), Ganzhou Municipal Ecology and Environment Bureau, 2025-10-17 | Easily decomposed, medium-grade material |
| Hydrometallurgical purification (extraction / ion exchange) | Efficient production of high-purity ammonium paratungstate or tungsten oxide (Eastmoney finance column, 2026-10-10) | Molybdenum-bearing mixed material, solution feeds |
| High-temperature reduction / thermal treatment | Produces tungsten powder at high energy cost (Eastmoney, 2026-10-10) | Alloy and powder swarf |
Three documented methods cover most industrial cases:
The route determines the settlement basis: pressure digestion lots are converted to tungsten content and priced against an APT equivalent, and rhenium-bearing material can carry an additional recovery stream. Scale is arriving — Xiamen Tungsten’s investor relations record of 2026-08-31 discloses a tungsten scrap recycling project at its Korea base with 1,500 t/year of tungsten oxide capacity, a sign that secondary tungsten is industrialising. When prices swing, the leverage runs both ways: any testing or separation error is multiplied by the unit price.
In our recycling and sputtering-target work the same pattern holds: assay method and separation route, not negotiation skill, decide the number the seller finally receives.
Before accepting material, establish whether it is tungsten-molybdenum co-generated scrap or single tungsten — if co-generated, confirm the counterparty actually operates a molybdenum separation line. Small batches are better toll-digested than processed in-house, because the barrier to owning a line is environmental permitting and reagent cost rather than equipment. Write contracts in dual terms: dry weight and tungsten oxide equivalent.
Related: our precious metal scrap pricing guide and XRF verification service. For questions on a specific consignment, contact Liaocheng Feiyan New Material Technology Co., Ltd. at +86 199 6359 4228 or fykj425@gmail.com.
Sources cited above: Baidu Baike, Tungsten scrap entry; Eastmoney finance column, 2026-10-10; Solid Waste Environmental Management Guideline for Tungsten Metallurgy (draft for comment), Ganzhou Municipal Ecology and Environment Bureau, 2025-10-17; Hydrometallurgy (2020), Wu Xinsheng and co-authors; patents WO2011150583A1, CN103060563B and CN120350227A (Wanfang Data, 2025-07-22); Central South University, Professor Hu Yuehua’s research group patent (2020); Xiao Liansheng, Progress and Prospects of China’s Tungsten Extractive Metallurgy (2013); Xiamen Tungsten investor relations record, 2026-08-31. Compiled 2026-10-25 by the industry research group of Liaocheng Feiyan New Material Technology Co., Ltd. as the English edition of our Chinese technical note published 2026-10-24. Recovery figures are those published by the cited sources; the result on a specific consignment depends on its own assay.
It depends on the feed. Tungsten concentrate and cemented carbide are usually digested with NaOH under pressure, where recovery can exceed 95%; the Ganzhou guideline also lists atmospheric alkali, acid and salt decomposition as permitted routes, and easily decomposed material costs less to run at atmospheric pressure.
Meter the two metals separately. Convert assayed tungsten and molybdenum content into APT and ammonium molybdate equivalents respectively, then deduct moisture and impurities. That is clearer than a single price on total weight and removes most settlement disputes.
Each has its boundary. Moving-bed ion exchange suits low-molybdenum solution, holding a Mo/WO3 ratio of 2.5% or below to produce grade-zero APT stably; solvent extraction is more flexible for high-molybdenum feeds and continuous operation. Choose by feed composition.
Residual flotation reagents in the feed are the usual cause. Adding oxidant at the grinding stage to decompose those reagents shortens digestion time, and a 2020 patent from Central South University reports wastewater COD meeting Class 1 of GB 8978-1996, at 100 mg/L or below.
It should at least be measured. Once molybdenum enters the same leach liquor as tungsten it has to be removed anyway to reach APT specification, so separating it converts a purification cost into a saleable by-product rather than leaving it uncounted in an all-in tungsten price.
Liaocheng Feiyan New Material Technology Co., Ltd.
Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China
Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com
Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.