【Reference prices · live quotation prevails】 Au Gold ▲ 786.20 ¥/g Ag Silver ▲ 9.42 ¥/g Pt Platinum ▼ 318.60 ¥/g Pd Palladium ▲ 245.80 ¥/g Rh Rhodium ▲ 1240.00 ¥/g Ir Iridium ▼ 825.50 ¥/g W Tungsten ▲ 13.20 ¥/kg Co Cobalt ▼ 198.00 ¥/kg In Indium ▲ 1620.00 ¥/kg Mo Molybdenum ▲ 285.00 ¥/kg

Spent Rhodium Catalyst Recycling: Where the Metal Sits, How Assays Differ and How Settlement Is Calculated

Short answer: a spent rhodium catalyst is priced almost entirely on how well it was sampled, not on what it is. Rhodium content in ceramic honeycomb ranges from single-digit grams per tonne to several hundred grams per tonne depending on the application and how much dilution the lot carries, so two buyers looking at the same pallet can differ by 20% and both be honest. Liaocheng Feiyan New Material Technology Co., Ltd. settles spent rhodium catalyst on grams of rhodium confirmed in a milled, homogenised sample, priced against the domestic rhodium benchmark and less an agreed recovery loss and refining charge.

Everything below follows from that one point. Because the metal is worth thousands of RMB per gram, the practical questions are: where the rhodium actually sits, what fraction survives the process, and how much of the measured content the contract recognises.

Where the rhodium actually sits

Rhodium arrives at a refinery in four common forms, and each carries a very different dilution problem.

Scrap formTypical rhodium situationMain dilution factorWhat it means for sampling
Spent automotive honeycomb catalystRhodium present with platinum and palladium; low grams per tonne on the whole monolithCordierite substrate is most of the massWhole piece must be milled; surface reading is meaningless
Filter dust / grinding sludge from catalyst producersOften the richest form, hundreds of grams per tonneMoisture, oil and substrate finesDry-basis correction and moisture in the starting statement
Homogeneous process catalyst residue (hydroformylation, carbonylation)Rhodium in solution residues, carbon or tar matrixOrganic carbon and solventAsh-on-dry-basis basis; burns off during enrichment
Platinum-rhodium thermocouple and bushingKnown nominal alloy, usually 10% or 13% rhodiumBase-metal contamination from serviceFastest to assay; still demands individual metal pricing

The last row is the one exception where a nominal ratio is genuinely informative — and even there, service contamination changes the answer. Everything in the first three rows has to be measured.

Sampling decides the number

The sequence that holds up in a dispute: crush the whole lot, mill it to a consistent particle size, take increments across the pile rather than from one corner, reduce size by coning and quartering or a rotary splitter, split the final sample in two, seal one copy as the reserve held by each party, then assay. Skipping any one step tends to bias the result in a predictable direction, usually against whoever did not specify the method.

Instrument choice follows the same logic. Handheld XRF is excellent for triage — deciding which drums are worth trucking and where to take increments — and poor for settlement on honeycomb, because cordierite dilution, washcoat depth and particle size all shift the reading. XRF testing services are discussed in more detail in our XRF metal verification service page. Settlement work is done on the milled sample, either by fire-assay collection into a collector metal followed by ICP or gravimetric finish, or by full dissolution and ICP-OES/MS for carbon-bearing residues. The sampling sequence itself is set out step by step in PGM scrap sampling and assay.

What the number actually looks like

The settlement expression is measured content × recovery rate × benchmark metal price − refining charge. It is easier to see why each clause exists with a worked example, using the domestic indicative rhodium benchmark of 2,250-2,260 RMB/g posted on 24 October 2026:

ScenarioAssayed RhRecognised recoveryBenchmarkPayable RhGross value
A: 1 tonne of poor honeycomb50 g/t90%2,255 RMB/g45 g101,475 RMB gross
B: same lot, richer catch150 g/t93%2,255 RMB/g139.5 g314,573 RMB gross
C: 0.5 t of filter dust800 g/t95%2,255 RMB/g380 g856,900 RMB gross

Illustrative arithmetic only, shown to make the settlement formula concrete. Recovery assumptions are typical engineering ranges, not a quotation; actual recovery, refining charge and the assay result are specific to each lot.

Two things jump out. First, content is a multiplier — tripling the grade triples the gross value, which is why an unrepresentative sample is the most expensive thing in the transaction. Second, three points of recovery on scenario C is worth roughly 27,000 RMB, which is why the recovery-loss clause belongs in writing before the lot ships and not after it arrives.

Why two honest buyers quote differently

  • Different recovery assumptions. A buyer without the right enrichment route pays less because the metal will not come out cleanly.
  • Different loss treatment. Some quotes deduct expected inside the recovery line, others take it as a separate processing loss — same number, different transparency.
  • Moisture and dry-basis handling. Wet dust is billed by net weight; if no one says so, the difference lands on the seller.
  • Blended versus itemised pricing. On a platinum-palladium-rhodium lot, a single blended discount almost always underpays the rhodium.
  • Lot size and handling. A few hundred kilograms costs more per kilogram to handle than a full container.
  • Poisoning. Sulfur, lead and phosphorus contamination from service history reduces both recovery and the rhodium content that can be taken to 99.95%.

What to send before asking for a quote

Four things, and the quote comes back as a defensible range rather than a guess: photographs of the whole lot and of a representative piece, origin and service history (automotive exhaust, chemical reactor, catalyst production, laboratory glass bushing), lot net weight with moisture stated if there is any, and any previous assay report. If none exists, we ask for a representative sub-shipment first. In a week when the benchmark moves daily, splitting a lot across several settlement dates and taking each tranche on its own assay tends to beat trying to time a single shipment — the mechanism is explained in our precious metal recycling settlement guide. Related routes covered elsewhere on this site: palladium on carbon catalyst recycling and our broader precious metal recycling service.

Source note: rhodium, ruthenium and iridium reference ranges in this article are the indicative domestic quotes published on 24 October 2026 and repeated in the 26 October market review. Recovery figures are the typical engineering windows observed in production and are not a performance guarantee for any specific lot. All content sets out operating practice at Liaocheng Feiyan New Material Technology Co., Ltd. and does not constitute investment advice; settlement follows the mutually accepted assay and the signed contract.

Frequently asked questions

How much rhodium is in a spent honeycomb catalyst?

It varies by order of magnitude, from a few grams per tonne on heavily diluted ceramic monolith to several hundred grams per tonne on rich filter dust and sludge from chemical plants. Because the spread is so wide, no honest buyer quotes a firm price from a photograph or a part number; the number has to come from a representative sample.

Is a domestic Chinese rhodium quote used for settlement?

Yes, for lots settled in China. On 24 October 2026 domestic indicative rhodium 99.95% was posted at 2,250-2,260 RMB per gram. Listed overseas futures do not govern the settlement because rhodium has no liquid exchange contract of comparable volume.

Can handheld XRF settle a rhodium catalyst lot?

No. Handheld XRF is a screening tool on ceramic monolith: the cordierite substrate, washcoat thickness and grain size all distort the reading. It is useful for sorting and for deciding where to sample, but a settlement assay is done on a milled, homogenised sample by fire-assay collection or ICP after enrichment.

How can I avoid losing money on a spent rhodium catalyst lot?

Crush and mill the lot, take multipoint increments, seal a duplicate reserve sample held by both parties, and settle on grams of rhodium recovered after deducting an agreed recovery loss and refining charge. Never sell a honeycomb lot on count or weight alone.

What happens to the ceramic honeycomb during refining?

The monolith is milled and the washcoat carrying platinum, palladium and rhodium is separated from the ceramic carrier, usually through pyrometallurgical collection into a metallic phase, followed by dissolution, separation of the three metals and refining to rhodium powder of 99.95% purity.

Does Liaocheng Feiyan New Material Technology Co., Ltd. accept mixed platinum-palladium-rhodium catalyst in one lot?

Yes, and we prefer it assayed metal by metal. Each of the three is priced against its own benchmark and deducted its own refining charge, which is almost always better for the seller than a single blended discount for the whole lot.

Business inquiries:
Precious Metal Recycling · Grounding Materials · Products · Contact Us
Tel 19963594228 | Office 0635-2112001 | Email fykj425@gmail.com
← Back to News

Liaocheng Feiyan New Material Technology Co., Ltd.

Address: Room 8-1503, 15F, Building 9, Xingguang International Financial Center, Dongchang East Road, Dongcheng Sub-district, Liaocheng Economic and Technological Development Area, Shandong, China

Tel: 0635-2112001 / 19963594228 | Email: fykj425@gmail.com

Copyright © Liaocheng Feiyan New Material Technology Co., Ltd.. All Rights Reserved.

鲁ICP备2026056441号-1 | 鲁公网安备37159902000530号

⬆